Is Quick Shine® Compatible With Your Floors?
We often receive calls from customers asking if our Finish and Cleaners are compatible with certain floor types. The answer is YES! You can use our Quick Shine® Multi-Surface Floor Finish and Cleaner on a variety of sealed hard surface flooring, including; hardwood, laminate, tile, vinyl, linoleum, stone, and more!
From Luxury Vinyl Tile that is topping the newest floor trend to Bamboo wood, we have your floors covered! Our Floor Cleaners are PH neutral and will not leave behind a detergent residue like some competitor products. Simply squirt and spread our cleaner with a damp microfiber mop pad for a beautiful streak-free, clean floor surface.
If your floors are lacking their original shine, you can rely on our #1 selling finish products to add life and luster back into your floors. Quick Shine® Floor Finish and Quick Shine® Hardwood Floor Luster are high-quality polymers and superior to the competition leaving a lasting shine!
Maintaining is easy with our Quick Shine® Mops. Dry dust often to minimize dust and debris that can lead to surface scratches. If using damp, be sure to rinse your mop pad frequently to release trapped dust and dirt and prevent streaking. Protect, Shine, and Maintain is the secret to a lifetime of beautiful floors!
How can I get quick Shine off of my Allure floor
Hi Sue,
We recommend removing our Finish with Quick Shine Deep Cleaner. This product was specifically developed to safely remove polymer and wax finishes without harming hardwood floors or other types of hard surface floors such as tile, vinyl- including the new luxury vinyl, stone, marble, and laminate. Simply dilute the Deep Cleaner in HOT water and apply to the floor surface, let stand for a few minutes and agitate. Do small sections of the floor at a time. Then remove debris and build-up from the floor with a clear water rinse. For heavy buildup, you may need to increase the dilution of 1 cup per gallon to 3 cups per gallon. Deep Cleaner is concentrated, therefore one 27 oz. bottle will make roughly 2 gallons, which covers about 500 square feet and will not damage the sealant on hardwood floors. The Quick Shine Deep Cleaner is only available online at http://www.quickshine.net or by calling our Customer Service Center.
If you have additional questions, please contact customer service. We are always happy to help!
Can I use your Hardwood Floor Luster, brown label, on oak flooring that’s been most recently finished with S C Johnson paste wax (which is a solvent borne carnauba)? We have waxed Bruce brand hardwood floors from 1981.
Hi Matthew,
We do not recommend applying Quick Shine Hardwood Floor Luster over a paste wax. Quick Shine is a water borne polymer formulated only intended for use on factory sealed or polyurethane floors. For more information, please contact customer service at 800-255-1891. We are always happy to help!
Can you use the quick cleaner to remove your unlike wax or would it ruin it’s own shine?
Quick Shine Multi-Surface Floor Cleaner will maintain the shine while cleaning the Finish. If you would like to remove the Finish, we recommend using Quick Shine Deep Cleaner (red label).
How soon after installation of new hardwood floor (Stained and sealed with polyurethane) can QUICK SHINE HARDWOOD FLOOR LUSTER be applied? Thank you
Hi Henry,
Polyurethane typically requires a two-week cure time. We recommend waiting 2-3 weeks before applying Quick Shine to avoid hazing.
uses hollaway house luster on my vynl wood plank floor tried to remove with409 to soapy windex didnt work trying a steamer with your cleaner all blochy what do you suggest.
We recommend removing the Finish with Quick Shine Deep Cleaner
I used quick shine on my bamboo flooring and it was awful. I had to use a razor blade to scrap it off. Whoever recommended this product is totally wrong.
Hi Michael,
We are sorry to hear you did not achieve satisfactory results when applying Quick Shine to your bamboo floors. What floor cleaner did you use prior to our Finish? We recommend removing Quick Shine with our Deep Cleaner (available on Amazon). This product was specifically formulated to dissolve the floor luster and restore the floors back to the original condition.
Is Quick Shine available to use on parquet flooring
Hi Cathy,
You can definitely use our Quick Shine Multi-Surface Floor Finish on your parquet flooring. Check out our website for application tips for best results. https://quickshinefloors.com/product-category/stone-laminate-floors/
If you have additional questions, please contact customer service at 800-255-1891. We are always happy to help!
Can you use Halloway Quick Shine on a redwood deck?
Hi Margaret,
Our Quick Shine Floor Finish can be used on any hard surface flooring, however it may not hold up well outside as it is formulated for interior use. If you have additional questions please contact customer service at 800-255-1891. We are always happy to help!
Can this product be used on LIFEPROOF flooring?
Yes, Quick Shine is pH neutral and safe for any sealed hard surface flooring including Luxury Vinyl Plank Lifeproof flooring.
I wax every six months with this product. I have a dog, so I have few areas that were affected by urine. No damage, but I will be re-waxing soon. Do I have to use deep cleaner between waxes? My floors do not have a build up look.
Hi Timani,
You can spot treat your floors where the shine has become compromised with our Quick Shine Deep Cleaner. You do not need to use the Deep Cleaner every time you reapply but if you feel like it is necessary this time to remove all of the Finish and start fresh, the Deep Cleaner will remove all of the Finish so you have a clean floor to reapply again.
Can the multi-surface floor cleaner be used to clean marble floors as a whole. Not for just spot cleanings. Also any recommendations on how to go about cleaning marble floors?
Hi Rafael,
Yes, our Quick Shine Multi-Surface Floor Cleaner is very PH-Neutral and safe for marble floors. Simply squirt and spread with a damp microfiber mop. Frequently rinse your mop pad to release soil and continue on. Our no rinse formula will not leave streaks or residue behind like other cleaners. If you have any questions about our products, please contact customer service at 800-255-1891. We are always happy to help!
I have one area that the quick shine no longer is there. How do I repair to match
Have you already tried reapplying a new coat to that area? You can remove the Finish from that section and reapply as well to make sure there is no residue causing the issue of an uneven appearance.
Can quickshine products be used on bamboo floors
Hi Deb,
Absolutely! Quick Shine Floor Finish is a PH neutral formula designed to protect and shine any sealed hard surface flooring. If you would like more information on how to apply our Finish to your bamboo floors, please contact customer service at 800-255-1891. We are always happy to help!
Can I use quick shine on cork floors?
Hi Sean,
Yes, if your cork floors have a factory finish on them, our Quick Shine® Finish is safe to apply and provide a long-lasting shine. Quick Shine® Multi-Surface Floor Finish is a water-borne polymer formulation designed to protect and impart a rich, deep, protective glow to sealed hardwood floors, wood laminate, stone, tile, vinyl and all other sealed hard surface flooring. Please contact customer service if you have additional questions or need our application tips at 800-255-1891. We are always happy to help!
Can I use quick shine on slate fireplace
Hi Teresa,
You can use Quick Shine on any sealed surface, so yes you could use it on your slate fireplace. If you have additional questions, please contact 800-255-1891. We are always happy to help!
Can I use the floor finish on granite countertops?
Hi,
Although Quick Shine Floor Finish was formulated specifically for floors, many consumers have used it on a variety of surfaces including cabinets, tables, countertops and furniture. Our pH neutral formula is water based and does not contain toxic chemicals. For more information, please contact customer service at 800-255-1891.
Just laid new commercial VCT tile in rental. Will your product be okay to use on it? Do we need to use sealer first, then follow with Quick Shine?
Also, what process should we use later when renters move out (they don’t clean floors well). Should we strip down and start from bare floor again, Or just clean and rewax with your product?
Hi Theresa,
Great questions! Yes, Quick Shine is compatible with your commercial VCT tile floors. We do recommend testing a small area to assure satisfactory results. If the floors look well maintained when your tenants move out, you should be able to simply refresh the floors with a new coat of Finish. If you decide removing it is best, we recommend Quick Shine Deep Cleaner.
Can you use on commercial waxed tile floor for touch up shine?
Hi Clay,
Yes, our Quick Shine Finish is a water based polymer that dries and adheres to any sealed hard surface. We recommend testing a small area first to see if you get the desired shine you are looking for. If you need further assistance, please contact 800-255-1891. We are always happy to help!
Is quick shine floor finish recommended for dyed and sealed concrete (acrylic sealer)?
Hi John,
Yes, our Finish can go over concrete. However, when it comes to removing the finish from that area it can remove that acrylic sealer from the concrete surface as well. This product is meant for indoor flooring if you are looking to apply this to an outside area, we do not recommend this as the weather can compromise the shine of the finish. If you need further assistance, please contact 800-255-1891. We are always happy to help!
We’ve used quick shine on our linoleum floor for ten years! We scrub our floors monthly and apply it after each cleaning! All of a sudden our floor has turned brown except where we lay the throw rugs they remind me of a sunburn! We have been applying quick Zep Floor Stripper trying to get the wax off! What caused it to turn the floor brown in the first place! Thank you for your help! I can be reached at 989.550.8074
Hi Linda,
Thank you for your brand loyalty. Darkening of the floor can be caused when dirt or residue is trapped between layers of the floor finish. It may also be that you have never previously removed the finish in those ten years.
Based on reviews, it looks like I’ve finally found the product that will help make my old linoleum floors look much better, and I really want to use Quick Shine Floor Finish.
Can my steam cleaner be used afterward on the floors without a problem? Aside from a vinegar-water cleaning, that’s my most often-used method of cleaning those floors.
Hi Julie,
Our Quick Shine Floor Finish is “Like A New Floor In A Bottle!” You will be amazed at the rich shine it adds to your linoleum floors. We do not recommend cleaning over our Finish with a steam mop or vinegar solution as they can soften the finish and cause hazing. Maintain the Finish with our Quick Shine Multi-Surface Floor Cleaner. Our pH neutral formula will not streak or leave behind residue like other cleaners. For additional questions, please contact customer service at 800-255-1891. We are always happy to help!