Is Quick Shine® Compatible With Your Floors?
We often receive calls from customers asking if our Finish and Cleaners are compatible with certain floor types. The answer is YES! You can use our Quick Shine® Multi-Surface Floor Finish and Cleaner on a variety of sealed hard surface flooring, including; hardwood, laminate, tile, vinyl, linoleum, stone, and more!
From Luxury Vinyl Tile that is topping the newest floor trend to Bamboo wood, we have your floors covered! Our Floor Cleaners are PH neutral and will not leave behind a detergent residue like some competitor products. Simply squirt and spread our cleaner with a damp microfiber mop pad for a beautiful streak-free, clean floor surface.
If your floors are lacking their original shine, you can rely on our #1 selling finish products to add life and luster back into your floors. Quick Shine® Floor Finish and Quick Shine® Hardwood Floor Luster are high-quality polymers and superior to the competition leaving a lasting shine!
Maintaining is easy with our Quick Shine® Mops. Dry dust often to minimize dust and debris that can lead to surface scratches. If using damp, be sure to rinse your mop pad frequently to release trapped dust and dirt and prevent streaking. Protect, Shine, and Maintain is the secret to a lifetime of beautiful floors!
I used this to clean up a matte finish hardwood floor when I was moving out of my rental apartment. The landlord complained it’s too shiny now and that I ruined his floor. Is there any way to get it off? I don’t want to lose my security deposit.
Yours truly,
Restless Renter BG
Hi Ben,
Yes, we recommend removing Quick Shine Finish with Quick Shine Deep Cleaner. This product was specifically developed to remove polymer and wax finishes without harming hardwood floors or other types of hard surface floors such as tile, vinyl, stone, marble, and laminate.
Simply dilute the Deep Cleaner in HOT water and apply to the floor surface, let stand for a few minutes and agitate. Do small sections of the floor at a time. Then remove debris and build-up from the floor with a clear water rinse. For heavy buildup, you may need to increase the dilution of 1 cup per gallon to 3 cups per gallon. Deep Cleaner is concentrated, therefore one 27 oz. bottle will make roughly 2 gallons, which covers about 500 square feet and will not damage the sealant on hardwood floors. For more information, please contact customer service at 800-255-1891. We are always happy to help!
Can I use this on my cork floor?
Hi Stevie,
Yes, Quick Shine Multi-Surface Floor Finish can be used on cork floors. For application tips, please contact customer support at 800-255-1891. We are always happy to help!
What quick shine to use for engineered wood floor?
Hi Lily,
We recommend using Quick Shine Multi-Surface Floor Finish (green label) on your engineered hardwood floors to provide a protective shine to your floors. For more information, please contact customer service at 800-255-1891. We are always happy to help.
We have a painted concrete floor and want to improve it’s satin luster to a stronger shine. Can we use Quick Shine and would the shine improve?
Hi Kai,
Yes, Quick Shine can be applied to painted concrete floors to enhance a shine to the floor. For application tips, please visit our website or contact customer service at 800-255-1891. We are always happy to help!
I have urethane finish on my hardwood floors is your product able to be used on them
Hi Char,
Yes, Quick Shine Floor Finish can be used on polyurethane floors. Our pH neutral finish is water based and will provide a protective, deep shine to any sealed hard surface flooring. Please contact customer service at 800-255-1891 for application tips. We are always happy to help!
Can I use the cleaner and floor luster on bamboo laminate flooring? It’s kind of a matte finish and I would like more of a shine
Hi Megan,
Yes, Quick Shine is a pH neutral formula safe for bamboo floors. Our Hardwood Floor Luster will add a protective shine and our cleaner will help to clean and maintain the shine for months. For more information, please contact customer service at 800-255-1891. We are always happy to help!
Hello I used Quick shine floor finish first and now I have white spots what do I do to remove it. I also used wood cleaner to see if it remove quick n shine finish off my floor so now what I do
Hi Renee,
We recommend spot treating the affected areas with Quick Shine Deep Cleaner. Simply dilute our Deep Cleaner with hot water and apply to the affected area. Allow solution to sit for 3-4 minutes and wipe away. Once that area is clean and dry, reapply a few new coats of Quick Shine Floor Finish to even out the appearance of the floor again. Quick Shine Deep Cleaner is only available online at this time at http://www.quickshine.net or http://www.walmart.com. For more information, please contact customer service at 800-255-1891. We are always happy to help!
Can I use quick shine on my pergo floors
Hi Jackie,
Yes, Quick Shine is pH neutral and safe for pergo floors. For more information, please contact customer service at 800-255-1891. We are always happy to help!
Can you use this product on Ceramic Tile flooring?
Hi Mary,
Yes, we recommend Quick Shine Multi-Surface Floor Finish and Cleaner on your ceramic tile floor. For application tips, please visit our website or contact customer service at 800-255-1891. We are always happy to help!
I used restore a floor on my bamboo floor and it’s splotchy all over, looks like some of the finish is gone. I tried Bruce and Bona but no good. Please help me, what do you recommend?
Hi Jean,
We recommend using Quick Shine Deep Cleaner to remove the previous products so you can start with a clean floor. Simply dilute our Deep Cleaner with hot water and apply to 5′ sections at a time. Allow solution to sit for 3-4 minutes and mop away. You can also just spot treat the affected area. Quick Shine Deep Cleaner is only available online at this time at http://www.quickshine.net or http://www.walmart.com. Once the other products are removed and your floor is clean, we recommend Quick Shine Floor Finish to restore the color and beauty to your bamboo floors. For more information, please contact customer service at 800-255-1891. We are always happy to help!
I used the high traffic high luster product on polyurethane wood floors. I don’t think it was the correct product for these floors and has resulted in a terrible appearance. Can I use the Deep Cleaner to remove the high luster product without further damaging the wood?
Hi Alexis,
Yes, Quick Shine Deep Cleaner is a safe way to remove Quick Shine from polyurethane floors without damaging the wood. For removal tips please contact customer service at 800-255-1891. We are always happy to help!
I have granite floors, what is the best product for them to get the shine back?
Hi Donna,
We recommend using Quick Shine Multi-Surface Floor Finish (green label) to enhance the color and beauty to your granite floors and enhance a shine. For more information, please contact customer service at 800-255-1891. We are always happy to help!
My cleaning lady used the hardwood floor luster on my laminate floor. I wet mopped it and it has all these whitish looking streaks even after it dried.
What can I do to get rid of the streaks? Thank you!
Hi Beth,
You can spot treat the affected areas or remove the finish completely and start fresh with Quick Shine Deep Cleaner. Simply dilute our Deep Cleaner with hot water and apply to small sections at a time. Allow solution to sit for 3-4 minutes and mop or wipe away. Quick Shine Deep Cleaner is only available online at this time at http://www.quickshine.net or http://www.walmart.com. For more information, please contact customer service at 800-255-1891. We are always happy to help!
can i use it on stained concrete?
Yes, Quick Shine Floor Finish is safe for any hard surface flooring including stained concrete. For application tips please email customer service or call at 800-255-1891. We are always happy to help!
Hi, I sent you a question about my Travertine floor problem but I still didn’t get any response? I bought bottles to try applying again but I need to know what I can do in the areas that looks like vinager or other abrasive was used.. I appreciate your help and time answering my concerns. Thank you
Hi Marilene,
In the areas where you are experiencing hazing or discoloration, we recommend spot treating with Quick Shine Deep Cleaner. Once the finish has been removed, simply reapply a new coat of Finish and blend for an even shine. Quick Shine Deep Cleaner is only available online at http://www.walmart.com, http://www.quickshine.net or by calling our Customer Service Center.
Hi. I’m renting for the first time. My apartment has vinyl flooring in the kitchen and bathrooms. They look clean, but there’s no shine. I know not to use the one for hardwoods, but not sure which other Quick Shine I should I use. Also, will Quick Shine make the floors slippery? Thank you for your help.
Hi Randi,
We recommend Quick Shine Multi-Surface Floor Finish (green label) to add a shine to your vinyl floors. Our Finish contains anti-slippage agents to provide a safe walking surface. Once the floor is dry, you will not feel any slipping.
For more information and tips, please contact customer service at 800-255-1891. We are always happy to help!
Thank you, Mr. Quick! I appreciate your help!!